CORSA CS Ceramic Coating
CORSA CS Ceramic Coating will leave your paint protected with a hard glass-like barrier. It adds high gloss and lustre to paintwork and allows water to bead off easily due to the hydrophobic properties.
This coating also offers improved scratch resistant, reducing the amount of swirls caused by cleaning, although careful washing is still a must.
CORSA CS Ceramic Coating uses the same nano technology as other industry leaders and provides heat resistance of up to 750 degrees. It is the optimum paint protection coating that lasts up to 12 months if maintained correctly.
To achieve best results, we recommend using our products in the following order.
1. Clean with CORSA CS Snow Foam.
2. Dry with CORSA CS Veloce Shield.
3. Enhance with CORSA CS Intenso Enhancer.
4. Shield with CORSA CS Ceramic Coating.
Once the paint work is completely clean, apply a small amount of Ceramic Coating to the included applicator pad and lightly brush over each section of a panel, ensuring to only complete 1 panel at a time.
Allow the panel to dry for a few minutes and lightly buff the panel using a soft towel to remove any residue. Do not use a circular motion. Ensure to do this in a well shaded area out of direct sunlight. Upon completing the entire car, allow to cure for 24 hours to achieve maximum hardness.
Avoid driving or wetting the car within the drying period if possible. A 30ml bottle is sufficient to coat a medium sized car.